Cantilever Racking System
Cantilever racking system is ideal for storing long items, irregular items, and other materials without needing any pallets, it gives wide applications in machining operation and home center. Also, this cantilever racking is used for loading items smaller than the spacing between towers. To make a safe and reasonable cantilever system, towers spacing, upright capacity, and arm capacity are vita.
Our cantilever racking is made up of upright post, cantilever beam, and bracing. The upright post is welded with two pieces of cold-rolled C-shaped profiles, featuring light weight, strong load capacity, and low construction cost. Cantilever racking is an economical and beautiful storage system, which is one of the commonly used structures in abroad countries. Two rows of holes are punched on the post of the rack, and the hole pitch is 140(50) mm. Therefore, the cantilever beam is adjustable on the height of each level.
Cantilever racking system can offer a wide range of flexibility add-on capability. The height of the cantilever is usually below 2.5m. When a forklift is utilized, the height of cantilever racking can be less than 6m. The racking`s arm is less than 1.5m long. In most cases, its load capacity is smaller than 1000kg.
Contact Person: Vickie Sun
Tel: 0086 13584426100