Payment & Shipping Terms:
|Material:||Steel SS400||Color:||Blue And Orange|
|Loading Capacity:||500-4000 Kgs /pair Beam||Height::||1500-10000mm|
|Certificates:||CE Certified, ISO9001||Surface Treatment:||High-quality Powder Coating|
warehouse storage racks,
warehouse rack systems
Cusomized Design Warehouse Racking Systems In Pallet Racking System
Drive-in racking is suitable for the storage of goods at same size by large quantity, with higher space utilization. Drive-in racking is also known as drive through racking.
It is suitable for the storage of goods at same size by large quantity, with higher space utilization and lower cost.
It has no special channel for trucks, when storing goods the forklift operates from inner side to outer side, but oppositely when picking, that is called first-in, last-out. The theory of drive-in racking is to link the traditional rack of many lines together without special channel.
The way of installment can be put two sets of drive-in racking back to back or make one set stand against the wall, while the entrance and exit of forklifts use the same channel. Drive-in racking has good storage density but cannot operate first-in, last-out. This type of racking fits for storing standard cargo units.
Drive in racking system is one storage system which have high storage efficiency. The structure of derive in racking is different from other racking. The post structure mainly take side and vertical strength. All pallets are put on the suport arm rail which connect with post.
Most high density drive- n pallet racking systems are little more than conventional pallet racks, adapted and reinforced to meet the stringent demands of drive-in applications.
T Racking’s drive-in racking system provides the space efficiency and high volume storage of block stacking, with easy access to pallets. There are no aisles and no cross beams, providing maximum space efficiency. And because each pallet sits on its own support rails, pallets are no longer stacked on top of each other.
The major features of drive in racking:
• Drive-in racking is tailored to pallet and load size and handling equipment.
• Can be used with standard handling equipment.
• Rails adjustable optimize space utilization.
• Elimination of many working aisles
• Ideal for products with regular circulation
• Drive Through Racking can provide FIFO principle
• Drive In Racking can provide FILO principle
|Material||High grade SS400 Cold Rolled Steel|
Load Capacity & Dimension
|(1) Loading capacity: 500-4000 kgs /pair beam.|
|(2) Height: 1500-10000mm|
|(3) Depth: single row 800-1200mm ( decided by pallet size), back-to-back 1800-2700mm|
(4) Length: 1500/2000/2500/2800/3000/3300/3500/3600
|(5) Special sizes also available to specific storage needs.|
|Main Parts Specs(mm)||(1) Upright: 80*60*2.0/90*70*2.0|
|(2) Beams: 100*50*1.5/120*50*1.5/140*50*1.5/160*50*1.5/140*50*2.0/160*50*2.0|
|(3) Horizontal & diagonal bracings: 40*24*1.5|
|(4) Upright Footplates: 120*120*3.0|
|(5) Safety locking pins|
|Features||(1) Beam levers are adjustable in 75mm pitch interval.|
|(2) Different sizes, various specifications and colors are available according to your needs.|
|(3) Maximizes space utility ratio while retaining optimum product accessibility.|
|(4) Strength and rigidity prevents compression damage to goods.|
|(5) Bottom level of pallets can be stored on the floor, lowering structure costs.|
|(6) Bolts & nuts|
|(7) Anchors and all necessary components.|
|Surface Treatment||High-quality Powder Coating|
|Certificates||CE certified, ISO9001|
Pictures of Drive-in Racking
Packaging & Shipping
A. Each piece covered with wrapped film,
B. Uprights,& beams stacked up in a rule,packed together separately,
C. While shelf boards stacked up in a rule,packed together separately.
Contact Person: Vickie Sun
Tel: 0086 13584426100